How To Remove Mildew Stains From Boat Seats

Cleaning With Mineral Oil:

Mineral oil is a less common ingredient than vinegar or bleach. Mineral oil is created as a by-product during the distillery process of petroleum.

This cleaner is recommended for cleaning vinyl stains that are older, or even stains that have been caused by oil or grease.

This is because mineral oil has the ability to decompose oils while not doing damage to the surface featured underneath.

One important thing to note when using mineral oil for cleaning your seats it that it is mainly used for the stain itself. For this reason, you will want to make sure your seat is cleaned before proceeding with the mineral oil.

Tips on using mineral oil on marine vinyl seats include:

• To apply the mineral oil you will want to use a small piece of dry cloth that you have applied a few drops of mineral oil to.
• Wipe the stain with the cloth.
• If the stain seems to be really deep, you can consider using a few drops applied directly on the stain.
• Keep the stain on for about 5 minutes.
• Make sure you wash off the mineral oil.
• Repeat this process until the stain is sufficiently removed.

Mineral oil should not be used as a basic cleaning ingredient, it should be used more as a spot corrector for stain removal.

Make sure you are using the proper oil and that you are following any directions or special instructions.

Formula Using White Vinegar To Remove Mildew From Canvas

For generations, people have been using white vinegar as a cleaner around the house. If you are a boat owner, vinegar can be a helpful product to use to clean your boat too.

Vinegar has many uses. One of the most helpful is using vinegar to remove mildew from your boat. If you do not want to use bleach to clean your boat canvas, white vinegar is a good alternative to try.

Mix up a solution that is 1/2 white vinegar and 1/2 water. The brand of vinegar does not matter, I buy the cheapest gallon of vinegar I can find.

You can also use 100% white vinegar and forgo the water. I have been known to put the vinegar in a pump sprayer and soak down the canvas. I let is sit for up to an hour and I try to keep it wet the whole time.

If it starts to dry, I will mist it with a garden hose to help keep the vinegar wet and on the mildew stains. After it sits for that long, I use a soft scrub brush the agitate the canvas until the mildew comes off. Then I blast it with a ton of freshwater.

Star Brite Mold & Mildew Stain Remover

The Star Brite Mold & Mildew Stain Remover is the answer to my question of how to clean white vinyl boat seats. This product works like magic as it not only whitens but also removes mold and mildew stains on my boat seats. It served its purpose well without incurring any damage.

This products notable feature is its special bleach buffered formula, perfect for marine vinyl upholstery applications. I used this product for boat mold removal, and it didnt disappoint. Its fast-acting formula lifted the molds from my boat seats in less than half an hour.

Needless to say, removing mildew stains on boat seats without heavy scrubbing is made simple with this product. It is easy to use as it comes in a spray bottle. All you have to do is spray it on the stained surface, wait until it absorbs, and wash it off with water.

One of my boats suffers from severe mold and mildew, which I have not been able to solve by any other stain removers. It always took me long hours of scrubbing until I discovered this product. It saved my time and effort as it worked amazingly.

• Worked better than diluted bleach

• With bleach-and-chlorine-like smell
• Requires reapplying of marine sealant

Also Check: What’s The Best Rc Boat To Buy

Buy Now If Our Customers Could Theyd Give Us 6

Once in a great while, you can actually agree with the claims made by a product and dont feel letdown by the ensuing experience of using it. Such is the case with MiracleMist.

We promise that MiracleMist will clean your boat vinyl more thoroughly and faster than products youve used in the past. Our promise is supported by our chemistry a smarter chemistry that minimizes the dwell time needed to produce an impressive clean.

Not sold yet? We invite you to watch these videos to see what our customers have to say after their MiracleMist experience. We hope youll have the same reaction and will send us your video experience!

Different Types Of Seat Materials:

Boat seats are made with highly durable fabrics that are meant to survive any weather conditions and other elements that they may be exposed to.

Boat seats are often exposed to high amounts of both fresh and saltwater, UV rays from the sun, spills that can be food, sugary drinks, alcoholic drinks, cleaning agents, oil, and other substances, as well as dirt, grime, animal droppings, and all sorts of other things.

For this reason, the upholstery on your marine seats needs to be highly durable and easy to clean.

There are a few options for upholstery that can be used on a boat. These include:

Read Also: Can I Register My Boat Online

Products Mold And Mildew Cleaner

Finally, mildew has a nasty tendency of reoccurring, especially in boats where the environment is conducive to their growth. To prevent this from happening, 303 Products came up with a solution in the form of this mold and mildew cleaner + blocker formula.

What I love about this product is that it not only removes mold and mildew stains quickly, it does so upon contact. Moreover, its designed in a way that your boat seats are thoroughly cleaned of any mildew. Its even formulated to prevent them from reoccurring as well.

Additionally, it has a bleach-free formula which allows for cleaning delicate surfaces without the risk of damaging them. It also leaves behind a fresh scent, unlike formulas with bleach which produces a strong and harsh odor.

• Doesnt leave behind strong odors
• Safe for different types of surfaces even fabrics

• Might not effectively work on some areas

Clean Vinyl Seats Properly Conclusion

While the vinyl seats of your neighbors will slowly lose color and develop rips and tears, you can stand proud knowing that you’ve put the proper care and investment toward clean vinyl seats! When the time comes for them to reupholster their seats, or if they ask how you maintain yours so well don’t hesitate to lead them to this article and all of our amazing boating products. They’ll be sure to thank you for it.

FREE BOAT ERASER OFFER

Don’t Miss: What Is The Best Bowrider Boat To Buy

How Do You Get Stains Out Of Vinyl Boat Seats

Alcohol wipes work well to remove mold and mildew stains from the surface of your vinyl seats. Avoid using harsh cleaners that contain ammonia, bleach, Windex or Simple Green. They can easily scrub off or sand down the material.

Remove stains Get rid of pesky stains by using a simple home remedy of hot water and baking soda. Mix it into a paste and gently rub with a toothbrush until the stain is removed.

Thereof, How do you get stains out of white vinyl?

To remove stains, dampen a white paper towel or white cloth with isopropyl or rubbing alcohol. Work from the outside edges of the stain toward the middle. Change the paper towel or cloth frequently to avoid spreading stain until the stain is removed.

Also to know is, How do you clean white vinyl chairs? Baking soda & water Sprinkle baking soda on a damp cloth and rub into furniture. Use a damp cloth to rinse. Vinegar, warm water & Murphy Oil Soap Use a half a cup of warm water, a half a cup of vinegar, and two teaspoons of Murphy Oil Soap and wipe with a damp cloth.

Subsequently, question is, How do you get stains out of vinyl seats? If you have any spots to remove on your vinyl seats, you can make a paste with baking soda, which is known for brightening surfaces and lifting stains. To make a baking soda paste, simply mix three parts baking soda with one part water and add five to ten drops of dish soap to the paste mixture.

Also, How do you get stains out of vinyl fabric?

Choose The Right Cleaning Solution

Oh, the horror stories I’ve heard of some cheap Charlie that thought they could save a few bucks by attacking their vinyl seats with bleach and a pad of steel wool. I shudder at the thought. To clean vinyl seats you need to utilize the right cleaning product, or be at risk of wearing away the structural integrity of the vinyl itself!

Even supposedly “lighter” cleaning solutions such as Windex or that old Navy favorite Simple Green will deteriorate vinyl over repeated uses. You definitely don’t want to end up with a color-faded seat, especially one covered in duct tape patches for the myriad tears that will start developing once the vinyl seat starts to give.

Of course, reupholstering every few years isn’t an option for most of us either, so the only solution left to clean vinyl seats is a cleaner that doesn’t use harsh chemicals and can protect your seats properly. Enter The Better Boat’s marine leather conditioner and cleaner with UV resin!

Our marine leather/vinyl cleaner is so gentle that it will not degrade seats or trim even after years of use. It adds moisture to restore color, and leaves a UV resin that will prevent the color from being stripped away. When I hear horror stories of bleach and ammonia, this is what I recommend. It just works.

You May Like: How To Keep Birds Off Boat Canopy

First Try Dish Soap Or Boat Soap

If youve got mildew on your Sunbrella boat seats, start with the gentlest method. If you can remove the Sunbrella covers off of the cushion, this will enable you to soak the Sunbrella covers.

If your covers are removable, you can soak the Sunbrella covers in the soapy solution. Then, lay them out in the sunshine. Even if you can still see some mildew present after washing the Sunbrella covers, the stains may well bleach out in the sunshine as they dry.

Rmr Brands Marine Mildew Stain Remover

This marine mildew stain remover from RMR Brands boasts of a powerful formula that is 5 times stronger compared to other mildew remover brands. This allows you to remove mildew from boat seats a lot easier than before.

What I like about this mildew stain remover is that it instantly cleans and removes mold and mildew stains. Moreover, it was specially designed for use on marine surfaces, hence making it effective for use on vinyl seat cushions, covers, and dashboards.

I also like how it has an easy-to-use spray bottle design which allows me and other users to clean mildew stains easily without any hassle. Furthermore, the spray bottle design is also great for efficiently targeting mildew stains on your boat seats.

This powerful product contains sodium hypochlorite in its formula which enables it to remove mildew stains quickly and effectively. It can be applied and removed in just 30 seconds. This makes it easy for me to clean my seats and other parts of my boat while still having time to take it out for a ride.

• Effectively removes mildew stains from marine surfaces
• Easy to use spray bottle design that targets and cleans mildew stains
• Quickly removes mildew stains, allowing for more time to use your boat
• Also comes in a gallon version for larger mildew removal projects

• Less effective in removing dark stains from light-colored surfaces

Read Also: What Prop Is Right For My Boat

Cleaning Vinyl Boat Seats

There are few things more frustrating for a boat owner than mildew stains taking over your vinyl seats and comfy cushions. Not only are the black spots unattractive, but they can keep you from enjoying your time on board and even diminish the overall value of your boat. If you catch it early on, removing mold and mildew is fairly simple and can breathe new life into your boat’s interior. Keep reading to check out a few of our top tips for cleaning and maintaining vinyl boat seats on your pontoon boat.

Routine Cleaning

One of the best ways to prevent mold and mildew from appearing on your vinyl seats is to keep up with a regular boat maintenance schedule. Stock your first-aid kit with alcohol wipes that you can grab for quick spot cleaning.

• Make a solution of 1 gallon of water and 1/4 cup of mild soap.
• Use a soft cloth or sponge to wipe the vinyl in a circular motion, avoiding pooling water in the seams.
• Rinse the seats with clean water and a clean cloth to remove excess soap.

Deep Cleaning

Deep cleaning should be addressed whenever you put your boat away for the winter, mid-season and as you bring it back out in the spring.

• After cleaning with a mild soap solution and clean cloth, allow seats to dry completely and apply a vinyl cleaner with a soft-bristled brush or clean cloth.

Removing Deep Stains

Replacing Vinyl Seats

Proper Care for Your Bennington Pontoon Boat

Dont Create Additional Work For Yourself

Many people start out by cleaning their boat seats with a low-grade, low-intensity cleaner such as dish detergent solution to see if that does the job. Unless your problem is very minor, you may as well skip this step. If your mildew or mold problem is serious enough to cause odor, theres a good chance its already deep-set in your boat seats. Youre going to need a cleaner with a little more heft to make quick work of it.

Recommended Reading: What Is The Best Boat Wax

What To Look For When Buying A Mildew Remover For Boat Seats

Choosing the right mildew remover for your boat seats doesnt mean you buy any old mildew remover there is. Instead, you have to consider a number of factors to make sure that youre not only buying an effective mildew cleaner but also one that wont do more harm than good to your precious seats.

To help you with that, I have compiled a list of factors which you need to consider before buying a mildew remover for your boat seats. Theyre as follows:

• Composition

Its a good idea to check out what ingredients were used for the cleaners you are planning to buy. This ensures that the ingredients used wont be harmful to the material used for your boat seats.

Its also ideal to choose mildew removers that contain little to no bleach, considering the fact that it can only dull and discolor the fabric of your boat seats. However, there are some cleaners with bleach as an ingredient that can be used on your boat seats without damaging them, so they would be worth checking out as well.

On the other hand, you can also find mildew removers that are specifically made for marine surfaces, making them safe for use on boat seats.

• Ease of Application

No one wants a cleaner that would require more scrubbing than necessary. Therefore, it would be a good idea to check out mildew removers that are designed for easy application and removal.

An example of easy-to-use designs is the spray bottle which enables users to target a specific area for cleaning.

• Response Time

• Versatility

• Scent

Scrubbing Softly With A Brush

When you feel that spray has taken enough time to take its effect on vinyl, its the right time to move into the next step.

Apply a flexible brush on vinyl and make sure that the spray fumes cover every inch of your seat covers. I would recommend that the brush should have:

• non-scratch scrubber
• non-slip handle
• comfortable grip

Now start scrubbing softly with a brush on the affected patches. Dont get rough while doing so. Otherwise, you may end up damaging the boat seats surface.

Dont use a Drill Brush on vinyl seats, even if it has the fast rotary power. Nevertheless, it helps in cleaning fast with little effort.

Some people would suggest using a hard-pointed brush for scrubbing instead of a delicate brush. However, I wont.

Scrubbing with a hard-pointed brush would create much friction, and there is a higher chance of damaging the vinyl.

Read Also: What Is The Best Cuddy Cabin Boat

How To Repair Your Boat Seats:

Despite all the precautions that have been taken, you might still have some damage with your boat seats. Or maybe you bought a used boat and the seats need some work.

If you have an accidental tear in your seat, you will want to repair the damage as soon as possible. If you dont water might get into the seat and cause a mildew problem.

Repairing a tear with a vinyl repair kit is much less expensive than having to replace a seat that becomes too infested with mold.

If you plan to buy a vinyl repair kit, make sure you find one with a base compound that has a similar color to your already existing seats.

Follow the directions to apply the patch and make sure you follow up with a vinyl conditioner.

Overall, with the proper care and maintenance, you should be able to keep your seats in good condition for a long time.