Premium 4-bow Square Tube Pontoon Boat Bimini Top Cover

Pwr Arm Power Pontoon Boat Bimini Topmy Only Recommendation

Theres a trend in the pontoon boat community at the moment to complete install PWR ARM tops to replace their existing Biminis. Ive not done this but have seen them in action loads over the last summer.

You can check the as well as a few reviews on the PWR ARM.

Here are some comments I found online with feedback on this electric powered top.

Ours is great. We have a covered boat lift, so its nice to be able to bring the top down by myself at the end of the day with just the press of a button while everyone else is unloading coolers and gear. And then to also put it up with just a quick unzip and press of a button while were loading up and getting ready to head out.

I bought and installed mine last spring and love it. It is easy to install with very clear instructions. Only hard spot is getting wire from one side to the other. I ran the wires through the aluminum frame of the top though, and it works fine.

We bought two about a month ago to have 20 foot of top on our 21-foot boat and have begun installation. Both tops are assembled and clamped in place and have tested. Really like them so far, sure Ill like them much better when permanently installed!

Great customer service. I had a malfunctioning motor just on the edge of the warranty period. Sent the bad part in and it was returned to me the same day that it was received plus transit time.

Heres what you get:

And heres a video of the PWR ARM in action.

More About Carver’s Replacement Canvases

Carver uses the same features on this product that they do on their custom made bimini top canvases. With some canvases, you have to remove your frame from the boat to install them. This one has zippered sleeves so it goes on easily and quickly. It comes off just as smoothly, so you can pack it up for storage when you aren’t using the boat. The canvas also has a cut out for a running light.

This replacement canvas is made to fit a large variety of manufacturer’s 4 bow square tube pontoon bimini top frames. We offer the replacement fabric in lengths of 8, 9, or 10′. Canvases are offered in various materials and colors to choose from, each finished with black trim. To measure your existing bimini and determine which size you need, put your frame in the open position, and measure the length of the frame from the front of the front bow to the back of the back bow. This canvas is made to fit on a frame with a tubing diameter of either 1 or 1.25″. It’s made for a bimini that mounts at widths of up to 102, and for a height of 48″.

If you have any questions about our pontoon bimini top replacement canvas, please feel free to call us, email, or do a live chat. We are happy to answer any questions you may have!

Looking for something else? Follow these links for storage boots or a full replacement Bimini Top.

If you need a replacement canvas or boot for a Bimini on a boat other than a pontoon, we can probably help you there too- just give us a call at 1-866-626-8377.

Leader Accessories Cover & Framemy Budget Recommendation

Before the Summerset Bimini top, I used a Leader Accessories Bimini top. It gave me a couple of years use before I shanked the frame when trailering my pontoon. I managed to fix the frame buckles up, but had a few minor tears so decided to do a full replacement.

But, prior to that it worked just fine for me with no complaints, so I dont hesitate to recommend it at all. Take a to see how well regarded this top, cover, and frame kit is.

• Made of marine-grade 600D polyester fabric. Double-overlapped stitching and UV resistant.
• All stainless-steel mounting hardware, color co-ordinated zippered storage boot and assemble instructions included.
• 1 diameter aluminum frame with double-walled main bow legs for maximum strength and free quick release mounts.4 adjustable nylon straps for the front and the rear.
• 12 optional fabric colors
• 7 different sizes are available

You May Like: Is Boat Insurance Required In Ohio

Northstar Double Bimini Top Pontoon Boat 15 Long Sunbrellamy Budget Recommendation

I say budget, but its still a lot of money, but thats what you need to pay for double-coverage. Its a NorthStar again so has the same spec as before, its just shorter at 15 feet in length.

What I love about NorthStar is that once you have ordered from them via Amazon, they let you email them and then adjust the width of the Bimini frame and canvas if its not quite the right dimensions for your pontoon boat.

To see evidence of their great customer service, read the reviews and questions, .

Summerset 4 Bow Canvas Top & Framemy Best Recommendation

This is the exact make and model I used to replace my last Bimini in 2017, and so far, very good. It offers great shade and protection and is really sturdy.

With marine-grade canvas, its not weathered yet, has no frays or tears, and is very, very strong. It took me 60 minutes to install, and I was able to hook it up to my existing brackets easily .

• Solution Dyed Fabric Provides 99.9% UV Protection.
• Waterproof / Breathable Material Prevents Fading.
• Heavy duty 1 Super-Trude Square aluminum frames. 40 MPH Speed Rating.
• Quick and Easy Installation. Handmade / Premium Quality.
• Includes Matching Storage Boot & Rear Support Poles.

You May Like: Pontoon Boat Rental Wisconsin Dells

Northstar Pontoon Boat Double Bimini Top 18 Long Sunbrellamy Biggest Recommendation

This is HUGE. Its 18 foot in length but does come with a price to match. However, it comes with a 10 YEAR WARRANTY which is almost unheard of with Biminis. Read the full specification and .

So, what makes the manufacturer so confident in this double top, cover, and frame? Its the anodized aluminum frame, stable fittings, and 9.25oz marine grade sunbrella, coupled with the poly thread UV which offers such great protection and quality.

• 18 long double Bimini made with sunbrella material
• 2 independent 8 long tops with removable zippered connector
• 1 square satin anodized tubing with metal fittings and deck mounts
• Storage boots included
• Cut-out for Stern Light in rear Bimini

Best Double Bimini Top For Pontoon Boat

But what double Bimini tops? They are a great choice if you need extended coverage from the sun over your deck and console. I am considering one myself given I take the kids out so much and want to keep them protected from the UV.

I dont own one yet but am seriously considering it. Heres a couple of selections that my buddies own and love.

Also Check: How Long To Cross The Atlantic By Boat

Square Tube Pontoon Bimini Top

Carver Square Tube Bimini tops are constructed from a 1″ aluminum tubing, anodized with a satin finish, and complete with high grade nylon fittings. The canvas features four-ply double folded seems and weather resistant thread. Each square tube Bimini top will come with an attached rear brace kit, a complimentary storage boot, and the necessary hardware for installation.

In addition to the standard square tube Bimini tops, you will find a variety of unique items including a Double Bimini top, free standing Bimini top, and replacement canvas options. Replacement canvases are available in 3 sizes and equipped with zippered sleeves and a light cut-out.

All Carver Biminis and canvases are built in Landrum, South Carolina.

Summerset Elite Bimini Tops

Summerset Elite Bimini Tops are handcrafted with 100% solution dyed acrylic fabric to ensure vibrant and exquisite colors that last. This mildew resistant fabric is custom fitted to sturdy hardware that is easy to install onto any boat. Arcrylic fabric options for Summerset Elite canvas include Sunbrella and Sunflair. Sunbrella® fabric is the #1 fabric choice for boaters and is completely breathable offering the best warranty in the marine industry. Sunflair has the same performance characteristics as Sunbrella, but is available at a more economical price. Summerset Elite Bimini Tops are built to last, providing protection you need year after year. All Summerset Elite Bimini tops also come with a free matching storage boot! This is the best boat canopy available today.

• Sunbrella or Sunflair Acrylic Fabric
• Free Easy Fit installation kit
• Stainless Steel mounting hardware

Don’t Miss: Lake George Island Boat Tours

Pontoon Top In Standard Square Tube

Our square tube bimini top is offered in a height of 48″ or 54″, and is offered in lengths of 8, 9 or 10′. This bimini will mount between widths of 91-102″. All square tube bimini tops come with a free matching rear brace kit.

Square Tube Bimini Tops are designed and engineered in Landrum, SC by Carver Industries, and are constructed with these quality features:

• FREE matching rear brace kit
• FREE matching storage boot
• Canvas custom fitted to frame
• 1″ wide, black polypropylene, adjuster straps included to ensure a sleek looking canvas
• Warranty, based on material
• 9.25 oz. Sunbrella®/Outdura® Acrylic material – 10 Year Warranty
• 7.6 oz. Sun-DURA® – 7 Year Warranty

$783.99

Leader Accessories 3 Bow Cover & Framemy 3 Bow Recommendation

The previous two reviews were of 4 bow cover tops. But, if you need 3 bows, look no further than the Leader Accessories Bimini. Its cheap, easy to install, and comes in loads of different colors so you should be able to find one that suits your preference.

Plus, it has some of the best reviews on Amazon I have ever seen in this industry. Want to see for yourself? Go look for yourself and .

The specifications are virtually the same as the 4 bow version I highlighted previously.

Read Also: How Much Psi To Pressure Wash Boat

Economy Pontoon Bimini Frames

1.25 Square frame with aluminum hardware

These pontoons bimini frames are the strongest in the industry!

Our exclusive heavy-duty 1.25 square anodized aluminum frames and matching mounting hardware ensures long life and durability no matter the environment.

The aluminum deck mounts will fit up to 1.25″ square pontoon boat railing

All our pontoon bimini tops include a free pair of rear support poles and all necessary hardware, so the frame will sit back on its rear braces or lay flat on your rails.

Pontoon Top To Double Bimini Square Tube

Square Tube Double Bimini Tops are designed and engineered in the USA by Carver Industries in Landrum, SC. Here are some features that come standard on this quality top:

• This double bimini top is designed specifically for pontoon boats 22′ or more in length. Once the top is utilized, it will offer a full 16′ of coverage and shade.
• These bimini tops are made from 1″ square tube, satin finished aluminum. The tops come standard with all mounting hardware, and the fittings are high grade nylon.
• This top is essentially two bimini tops which are made to zip together in the middle.
• Please keep in mind that the tops MUST be zipped together before the brace kit is adjusted on the forward bimini.
• The rear portion of the bimini comes standard with a running light cut out, zippered sleeves for easy installation and removal of canvas, a rear brace kit, and front hold down straps.
• Please note that this top will not work for rails which differ in height, like those on a fishing style pontoon boat. The height of the rails can be no more than 6″ in difference for the top to work properly.
• Each package will include detailed instructions for assembly and installation of the bimini.

You May Like: Do You Need Boat Insurance In Georgia

Bimini Tops From The Experts

We specialize in getting you the right bimini top boat canopy for your needs. We do this by offering a wide variety of boat canopy options made from the most durable marine grade materials including Marinex and Sunbrella. National Bimini Tops carries industry leading cover brands such as Summerset, Summerset Elite, and NBT house brand. We stock 2 and 3 bow round tube bimini tops and 4 bow square tube biminis all with a focus on durability, long life and style. There is simply no better boat canopy available today.

Please call us if you need help selecting your bimini, our USA based fit experts are happy to help!

Frame & Hardware Options

Whether you choose between our 1 and 1.25 OD square tubing, all our pontoon frames are made of extremely strong anodized aluminum with a satin finish, custom made exclusively for ANP. You will not find this quality tubing anywhere else.

It is the same grade tubing we use for our prestigious boat builders. All you need to do is select the size of your tubing and dress it up with your favorite hardware and your bimini top will be made to order to your specifications.

Also Check: Is Boat Insurance Required In Minnesota