Pennsylvania Boat Registration Numbers
Pennsylvania boat registration numbers should be in plain, block style lettering and a contrasting color to the background so they are simple to read.
They should have two letters as the prefix, a series of four numbers, then two letters as the suffix with spaces or hyphens dividing them, for example: PA 1234 AA. The registration number should be attached on each side of the forward half of the hull and three inches in height the registration number should be the only number placed on the forward half of the bow.
Pennsylvania boating law states that Display of registration number and validation decal. The registration number shall be displayed above the waterline on both sides of the bow of the boat, considered to be any part of a boatâs side forward of a point halfway between the front and the back of the boat.
South Carolina Boat Registration Numbers
South Carolina boat registration numbers should be affixed to both sides of the forward half of the vessel. These should be the only numbers on the forward half of the boat.
The boat registration numbers must be in three inch, block style lettering. The numbers should be easily read left to right. The registration number color must contrast with its background color.
Letters must be separated from the numbers by a space or hyphen, for example: SC 1234 AA. No other numbers may be displayed on either side of the bow.
South Carolina boating law states that every vessel using the waters of this State shall be numbered except those exempt by Section 50-23-320. No person shall operate or give permission for the operation of any such vessel on such waters unless the vessel is numbered in accordance with this chapter or in accordance with applicable Federal law or in accordance with a Federally-approved numbering system of another state.
Wisconsin Boat Registration Numbers
Wisconsin boat registration numbers should be securely placed on the forward half of the vessel they should be the only numbers placed in this location.
Boat registration numbers must be easily read from left to right in a plain, block style font. Also, they should be three inches in height and be in a contrasting color to the background color.
There should be a space or hyphen dividing the prefix, four numbers, and suffix, for example: WS-1234-AA.
Wisconcin boating law states that upon being issued a certificate of number card and awarded an identification number, the owner of the boat shall paint on or attach the identification number to each side of the forward half of the boat in the manner prescribed by rules promulgated by the department. The owner shall paint or attach the identification number so it is clearly visible and shall maintain the identification number in a legible condition at all times.
Also Check: How To Clean Mildew Off Boat Seats
Registration Labels And Identification Marks
Boat owners must display their vessel’s registration number clearly. See how to display it correctly below.
The owner of a registered recreational vessel, other than personal watercraft, must ensure that the identification mark is painted or displayed:
- on each side of the hull of the vessel
- forward of the beam
- so that the highest part of each digit commences at a point no more than 75 mm below the gunwale
- in characters that are:
- no less than 150 mm high
- in proportionate breadth
- coloured in contrast to the surface on which they are displayed.
See our personal watercraft page for details of PWC registration label requirements.
Ha 1234 Ab Or Ha1234ab
Registration decals must be displayed along with registration numbers on the forward half of the bow. The state does not provide free or paid registration numbers to display on your vessel. We have included customizable templates to create registration numbers in accordance to Hawaii requirements. We have also included a boat name and hailing port template for those vessels that are documented with the U.S. Coast Guard.
- A vessels lifeboat
- Vessels owned and operated by the United States
- A vessel from another country using the waters of the state for less than 61 days
Vessels that are required to paint or display numbers must do so on the forward half of the vessel. The state does not explicitly outline height requirements, but it can be assumed that numbers and letters must be at least three inches in height in block characters, with the color contrasting the background of the boat. Numbers and letters must be separated by a hyphen or space of equal distance, as seen below.
You May Like: How To Look Up Boat Registration
Tennessee Boat Registration Numbers
Tennessee boat registration numbers should be in a plain, block style lettering and a contrasting color to the background so they are easy to read. There should be two letters as the prefix, four numbers, then two letters as the suffix with spaces or hyphens dividing them, for example: TN-1234-AA.
The registration numbers should be placed on each side of the forward half of the boat and three inches in height it should be the only number placed on the forward half of the bow.
Tennessee boating law states that every vessel propelled by sail or machinery, or both, upon the waters of Tennessee shall be numbered for identification in accordance with this chapter and the regulations of the commission.
Ak 1234 Ab Or Ak1234ab
With all boats documented through the U.S. Coast Guard and not the state, the hailing port and boat name must be displayed on the exterior hall in 4-inch lettering. Commercial vessels must display name on port and starboard bow, and stern. Those vessels must also display the hailing port on the stern. The hailing port must include a place and a state, territory, or possession.
The state does not provide free or paid templates or examples for registration numbers. We have included customizable templates below for creating registration numbers that meet Alaska requirements.
More information on registering a watercraft can be found on the Alaska DMV website.
Recommended Reading: How To Clean Mildew Off Boat Seats
Q: How Long Are The Registration And Title Good For And How Much Do They Cost
A: The title certificate is good for the life of the boat, or until the boat is sold or otherwise transferred, at which time the new owner must obtain a another title. The title fee is $27.50. This is a one-time charge.
The boat registration certificate is valid for two years from the date of issuance. Cost is based on the length of the vessel.
South Australia Boat Registration Numbers
Motorboat registration label and numbers
The Boat registration number issued to the boat must be
- Displayed on both sides of the bow using stick-on numbers
- A contrasting colour to the surface in figures at least 150mm high
- Clearly legible at a distance of 50 meters while the vessel is underway in clear weather. for boats less than 3 meters in length, registration numbers must be
- At least 100mm high
- Clearly visible from 50 meters.
Note: On boats with excessively flared bows making the display of boat registration numbers difficult, approval may be granted to display the boat numbers on each side of the cabin.
Your Boat registration label must be
- Securely affixed to the boat adjacent to the steering position
- Clearly visible to a person inspecting the boat from aboard.
You May Like: Is Banana Boat Sunscreen Gluten Free
Placement Of Michigan Mc Registration Numbers
The following information from the guide to Michigan MC number sticker placement can be found on the State of Michigan web site.
Watercraft Registration Number:
Watercraft owners must paint or permanently attach the assigned registration number on each side of the forward half of the vessel as high above the water line as possible. The number must contrast with the color of the background so it is visible and legible.
All letters and numbers must be plain block characters at least 3 inches high, reading from left to right. Place a hyphen or leave space equivalent to the width of your letter M between the letters and numbers.
Texas Boat Registration Numbers
Texas boat registration numbers must read from left to right, be in block style lettering, as well as three inches in height. Registration numbers should be of a contrasting color with the color of the vessel.
The numbers and letters in the registration number must be separated by hyphens or a space, for example: TX 1234 AA. Boat registration should be placed on the forward half of the boat on each side and be the only number in this location.
Texas boating law states that each vessel on the water of this state shall be numbered in accordance with the provisions of this chapter unless specifically exempted. The numbering system shall be in accord with the Federal Boating Act of 1958 and subsequent federal legislation.
Recommended Reading: Freedom Boat Club Lindenhurst
Georgia Boat Registration Numbers
Georgia boat registration numbers should be affixed to both sides of the forward half of the vessel. These should be the only numbers on the forward half of the boat.
The boat registration number must be in three inch, block style lettering. The numbers should be easily read left to right. The registration number color must contrast with its background color.
Letters must be separated from the numbers by a space or hyphen, for example: GA 1234 AA. No other numbers may be displayed on either side of the bow.
Georgia law states that the identification number assigned to all registered vessels, except those documented by the United States Coast Guard, shall be permanently painted or attached to each side of the forward half of the vessel, and no other number may be displayed thereon. Numbers shall read from left to right, be in block characters, be of a color contrasting with the background, and be not less than three inches in height nor more than one inch apart. There shall be a hyphen or space between the prefix letters and numerals and between the numerals and the suffix letters. The hyphen or space shall be equal to the width of any letter except I.
Il 1234 Ab Or Il1234ab
The state of Illinois does not provide free or paid boat lettering templates or decals. We have included customizable templates below for boat lettering and boat decals according to the requirements set forth by Illinois law.
More information on how to register your boat can be found on the Illinois Department of Natural Resources website.
You May Like: Colorado Boat Licensing
Q: I Purchased My Boat From A Car Dealer
A: Car dealers that are not registered boat dealers must first title the boat in the car dealer’s name before legally selling the boat. The car dealer must also pay a sales tax to the Department of Revenue before titling the boat. Once the car dealer has applied for and received the title from the state, the sale can be made.
B Registered Vessel Canada
IN CANADA MINIMUM 4″ MARKINGS are required on the hull. Please see the detailed information form the Transport Canada Site Below.
Q8. What are the marking requirements?
A8. Your Certificate of Registry is not valid until you have your vessel marked according to requirements noted on the back of your Certificate of Registry:
-
Name and Port of Registry:
For pleasure craft and air cushion vehicles, both the name and port of registry must be marked together on a clearly visible exterior part of the hull. For commercial vessels, the vessel name must be marked on each bow and the vessel name and port of registry must be marked on the stern. If the vessel has a square bow, the name may be marked on a clearly visible exterior part of the bow. You may make the markings by any means and materials that result in durable markings. All must be at least 10 cm in height, made in clearly legible letters of the Latin alphabet or Arabic or Roman numerals.
- SEE THE COMPLETE REGULATIONS HERE.
Read Also: How To Get Rid Of Mildew On Boat Seats
Ar 1234 Ab Or Ar1234ab
Vessels that are already documented with the U.S. Coast Guard must register with the state, but do not need to display registration numbers as long as a hailing port and boat name are displayed.
Registration decals must be displayed along with the registration numbers. Free or paid registration numbers are not provided for by the state. We have included customizable templates below according to the Arkansas boat registration requirements.
More information on Arkansa boating laws can be found on the Arkansas Department of Finance and Administration website.
Special Cf Numbers Applications
Boat dealers and manufacturers may secure a special number for demonstrating or testing unregistered vessels. The number must not be permanently affixed to any vessel and it is not transferable.
Original ApplicationsThe requirements are a completed Application for Boat Registration Number Dealer-Manufacturer form with Dealer or Manufacturer checked and the applicants Board of Equalization account number and the original registration fee. .
Renewal ApplicationsA new completed BOAT 101A and the registration fee must be submitted for any dealer or manufacturer vessel number that is not renewed prior to midnight of the expiration date. A certificate of nonoperation is not acceptable
The application requirements for special use vessels are the same as for a dealer/manufacturer application. An example of special use would be a marina borrowing vessels from vessel manufacturers throughout the United States for use in movie productions and then returning the vessels to the manufacturers at the end of filming.
The requirements are:
You May Like: How To Clean Mildew Off Boat Seats
Idaho Boat Registration Numbers
Idaho boat registration numbers should be affixed to both sides of the forward half of the vessel. These should be the only numbers on the forward half of the boat.
The number must be in three inch, block style lettering. The numbers should be easily read left to right. The boat registration number’s color must contrast with its background color.
Letters must be separated from the numbers by a space or hyphen, for example: ID 1234 AA. No other numbers may be displayed on either side of the bow.
Idaho boating law states that The owner shall also receive a vessel number that shall be permanently assigned to the boat. The owner shall paint on or permanently attach to each side of the bow of the vessel the vessel number and validation sticker in a manner as may be prescribed by rules of the department in order that they may be completely visible, and the number shall be maintained in legible condition.
Mississippi Boat Registration Numbers
Mississippi boat registration numbers should be affixed to both sides of the forward half of the vessel. These should be the only numbers on the forward half of the boat. The number must be in three inch, block style lettering. The numbers should be easily read left to right.
The boat registration number color must contrast with its background color.
Letters must be separated from the numbers by a space or hyphen, for example: MI 1234 AA. No other numbers may be displayed on either side of the bow.
Mississippi boating law states that All sailboats and every undocumented vessel equipped with propulsion machinery, whether or not such machinery is the principal source of propulsion, using the territorial and navigable waters of the State of Mississippi, and every such vessel owned in the State of Mississippi and using the high seas shall be numbered.
Read Also: Mold On Boat Seats
Why Are Some Colors Hidden
We only allow certain combinations of specialty colors. Colors like Ultra Metallic, Reflective, and Fluorescent for example cannot be mixed together on the same graphic.
A few additional options are available when doming is enabled. This includes the addition of chrome mirror.
To view all of the colors available you need to change all of options you’ve selected back to a standard color.
Montana Boat Registration Numbers
Montana boat registration numbers must be clearly visible on each side of the bow of the vessel as well as easily read from left to right the registration number must be the only number on the forward half of the bow.
The boat registration number must be three inches in height and be a color contrasting with the background color of the boat.
They should contain a space or hyphen separating the “MT” from the number/letter suffix, for example: MT-1234-AA.
Montana boating law states The identifying number assigned must be painted on or attached to each outboard side of the forward half of the motorboat, sailboat, or personal watercraft or, if there are no sides, at a corresponding location on both outboard sides of the foredeck of the motorboat, sailboat, or personal watercraft. The identifying number assigned must read from left to right in Arabic numerals and block characters of good proportion at least 3 inches tall excluding border or trim of a color that contrasts with the color of the background and be so maintained as to be clearly visible and legible. The identifying number may not be placed on the obscured underside of the flared bow where it cannot be easily seen from another vessel or ashore.
Recommended Reading: How Do I Register My Boat In Colorado
Pleasure Craft License Numbers For Hull
You must licence your pleasurecraft if it is over 10 HP and used for non-commercial purposes. There is no fee to licence your pleasure craft but it is necessary for marine safety and identification. In Canada, minimum 3″ BLOCK numbers that display your pleasure craft licence are to be affixed to the hull on both sides, as far forward as possible. These are to be contrasting in colour to the colour of the hull to which they are affixed. I hope that makes sense. We offer 30 different colours to choose from, in durable 7 year custom cut vinyl.
